Initial Inspection and Diagnostic Overview

Component Inspection

FUEL PUMP
1. Disconnect fuel level sensor unit and fuel pump harness connector.




2. Check resistance between fuel level sensor unit and fuel pump terminals 1 and 3.
Resistance: Approximately 0.2 - 5.0 Ohms [at 25 °C (77 °F)]

CONDENSER
1. Turn ignition switch OFF.
2. Disconnect condenser harness connector.




3. Check resistance between condenser terminals as 1 and 2.
Resistance: Above 1 MOhm at 25 °C (77 °F)