Initial Inspection and Diagnostic Overview

Component Inspection

VIAS CONTROL SOLENOID VALVE

With CONSULT-II
1. Reconnect harness connectors disconnected.
2. Turn ignition switch ON.
3. Perform "VIAS SOL VALVE" in "ACTIVE TEST" mode.




4. Check air passage continuity and operation delay time under the given conditions.




Without CONSULT-II
Check air passage continuity and operation delay time under the given conditions.

VACUUM TANK




1. Disconnect vacuum hose connected to vacuum tank.
2. Connect a vacuum pump to the center port of vacuum tank.
3. Apply vacuum and make sure that vacuum exists at the other port.