Inspecting Malfunctioning Parts Using Warning Lamp

DIAGNOSTIC PROCEDURE 6

Inspect SRS Malfunction Using "AIR BAG" Warning Lamp-Diagnosis Mode

NOTE: SRS will not enter Diagnosis mode if no malfunction is detected in User mode.

1. Turn ignition switch ON.
2. After "AIR BAG" warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two times.
5. Turn ignition switch ON.
SRS is now in Diagnosis mode.

"AIR BAG" warning lamp operates in Diagnosis mode as shown:

Part 1:

Part 2:

Part 3:

Part 4:

WARNING LAMP FLASH CODE CHART