Refrigerant Pressure Sensor / Switch: Service and Repair

Removal and Installation for Refrigerant Pressure Sensor

REMOVAL
1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure".




2. Disconnect the refrigerant pressure sensor connector and remove the refrigerant pressure sensor from condenser.

CAUTION: Do not to damage the condenser fins.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: Apply compressor oil to the O-ring of the refrigerant pressure sensor when installing it.

Refrigerant pressure sensor : 9.8 - 11.7 Nm (1.0 - 1.2 kg-m, 7.3 - 8.6 ft-lb)