System Specifications

SERVICE DATA AND SPECIFICATIONS (SDS)





General Specifications
Unit: mm (inch)
Front brake
Brake model CLZ25VE disc brake
Cylinder bore diameter 57.2 (2.25)
Pad Length x width x thickness 111.0 x 62.5 x 9.5 (4.37 x 2.46 x 0.37)
Rotor outer diameter x thickness 320 x 28 (12.60 x 1.10)
Rear brake
Brake model AD9E disc brake
Cylinder bore diameter 34.9 (1.374)
Pad Length x width x thickness 83.0 x 33.0 x 8.5 (3.27 x 1.30 x 0.33)
Rotor outer diameter x thickness 292 x 9 (11.50 x 0.35)
Master cylinder
Cylinder bore diameter 23.81 (15/16)
Control valve
Screw in type 30 x 0.4 (1.18 x 0.02)
Brake booster
Booster model M215T
Diaphragm diameter
Primary 230 (9.06)
Secondary 205 (8.07)
Recommended brake fluid Refer to "RECOMMENDED FLUIDS AND LUBRICANTS".





Disc Brake
Unit: mm (inch)
Brake model CLZ25VE AD9A
Pad wear limit
Minimum thickness 2.0 (0.079) 2.0 (0.079)
Rotor repair limit
Maximum runout 0.07 (0.0028) 0.05 (0.0020)
Minimum thickness 26.0 (1.02) 8.0 (0.31)
Maximum uneven wear (measured at 8 positions) 0.015 (0.0006) or less





Brake Pedal
unit: mm (inch)
Free height "H"*
M/T 164.1 - 174.1 (6.46 - 6.85)
A/T 173.1 - 183.1 (6.81 - 7.21)
Clearance "C1, C2" between pedal stopper and threaded end of stop lamp switch or ASCD switch. 074 - 1.96 (0.029 - 0.077)
*: Measured from surface of dash reinforcement panel to surface of pedal pad





Control Valve
Unit: kPa (kg/cm2, psi)
Applied pressure (front) 7,355 (75, 1,067)
Output pressure (rear) 5,100 - 5,492 (52 - 56, 739 - 796)





Brake Booster
Unit: mm (inch)
Output rod length 10.275 - 10.525 (0.4045 - 0.4144)
Clevis length 130 (5.12)