Rear

Precautions





^ When installing each rubber part, final tightening must be carried out under unladen condition* with tires on ground. Oil will shorten the life of rubber bushings. Be sure to wipe off any spilled oil.

*: Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions.
^ Use flare nut wrench when removing or installing brake tubes.
^ After installing removed suspension parts, check wheel alignment.
^ Do not lack up at the radius rod. front and rear lower links.
^ Always tighten the brake lines to specification when installing.
^ Lock nuts are not reusable parts; always use new ones. When installing, do not wipe the oil off of the new lock nut before tightening.