Antilock Brakes / Traction Control System

Malfunction Code/Symptom Chart

Malfunction Code Chart (Without CONSULT-II):

*1: If one or more wheels spin on a rough or slippery road for 40 seconds or more, the ABS warning lamp will illuminate. This does not indicate a malfunction. Only in the case of the short-circuit (Code Nos. 26, 22, 32 and 36), after repair the ABS warning lamp also illuminates when the ignition switch is turned ON. In this case, drive the vehicle at speeds greater than 30 km/h (19 MPH) for approximately 1 minute as specified in Self-diagnosis. Check to ensure that the ABS warning lamp goes out while the vehicle is being driven.
*2: The trouble code 57, which refers to a low power supply voltage, does not indicate that the ABS control unit is malfunctioning. Do not replace the ABS control unit with a new one.
*3: The trouble code 61 can sometimes appear when the ABS motor is not properly grounded. If it appears, be sure to check the condition of the ABS motor ground circuit connection.