Operation CHARM: Car repair manuals for everyone.

Radio, Stereo, and Compact Disc: Description and Operation

AUDIO

System Description

BASE SYSTEM
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times:
- through 15 A fuse (No. 32, located in the fuse and fusible link box)
- to audio unit terminal 6.

With the ignition switch in the ACC or ON position, power is supplied:
- through 10 A fuse [No. 1, located in the fuse block (J/B)]
- to audio unit terminal 10.

Ground is supplied through the case of the audio unit.

Audio signals are supplied:
- through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16
- to terminals + and - of front door speaker LH and RH
- to terminals + and - of rear speaker LH and RH.

MID LEVEL SYSTEM
Refer to Owner's Manual for audio system operating instructions.

Power is supplied at all times:
- through 15 A fuse (No. 32, located in the fuse and fusible link box)
- to audio unit terminal 6.

With the ignition switch in the ACC or ON position, power is supplied:
- through 10 A fuse [No. 1, located in the fuse block (J/B)]
- to audio unit terminal 10.

Ground is supplied through the case of the audio unit.
Ground is supplied to subwoofer amp. terminal 7 through body grounds B13 and B19.

Audio signals are supplied:
- through audio unit terminals 1, 2, 3, 4, 13, 14, 15 and 16
- to terminals + and - of front door speaker LH and RH
- to terminals + and - of rear speaker LH and RH
- to terminals + and - of pillar tweeter LH and RH and
- to terminals 1, 2, 3 and 4 of subwoofer amp.

PREMIUM SYSTEM
Refer to Owner's Manual for audio system operating instructions.

Power is supplied at all times:
- through 15 A fuse (No. 32, located in the fuse and fusible link box)
- to audio unit terminal 6
- through 20 A fuse (No. 42, located in the fuse and fusible link box)
- to audio amplifier terminals 1 and 2.

With the ignition switch in the ACC or ON position, power is supplied:
- through 10 A fuse [No. 1, located in the fuse block (J/B)]
- to audio unit terminal 10.

Ground is supplied through the case of the audio unit.

Ground is supplied:
- to audio amplifier terminals 3 and 4
- through body grounds B13 and B19.

Audio signals are supplied:
- through audio unit terminals 1, 2, 3, 4, and 12
- to audio amplifier terminals 13, 14, 15, 16, 17, 18, 19, 20 and 24
- through audio unit terminals 13, 14, 15 and 16
- to terminals + and - of rear speaker LH and RH.

The audio signals are amplified by the audio amplifier and then supplied:
- through audio amplifier terminals 5, 6, 7, 8, 9, 10, 11, and 12.
- to terminals + and - of front door speaker LH and RH
- to terminals + and - of pillar tweeter LH and RH and
- to terminals 1, 2, 3 and 4 of subwoofer.

Satellite Radio Tuner (Pre-wiring)
The satellite radio tuner pre-wiring allows connection of a satellite radio tuner.

Power is supplied at all times:
- through 15 A fuse [No. 32, located in the fuse and fusible link box]
- to satellite radio tuner pre-wiring terminal 18 (with CD autochanger) or 32 (without CD autochanger).

With the ignition switch in the ACC or ON position, power is supplied:
- through 10 A fuse [No. 1, located in the fuse block (J/B)]
- to satellite radio tuner pre-wiring terminal 17 (with CD autochanger) or 36 (without CD autochanger).

Ground is supplied through the case of the satellite radio tuner.

Then audio signals are supplied:
- through satellite radio tuner pre-wiring terminals 22, 23, 31 and 32 (with CD autochanger) or 21, 22, 23 and 24 (without CD autochanger)
- to audio unit terminals 41, 42, 43 and 44.

CD Autochanger
Refer to Owner's Manual for CD autochanger operating instructions.

Power is supplied at all times:
- through 15 A fuse [No. 32, located in the fuse and fusible link box]
- to CD autochanger terminal 4.

With the ignition switch in the ACC or ON position, power is supplied:
- through 10 A fuse [No. 1, located in the fuse block (J/B)]
- to CD autochanger terminal 6.

Ground is supplied through the case of the CD autochanger.

Audio signals are supplied:
- through CD autochanger terminals 1, 2, 7 and 8
- to audio unit terminals 41, 42, 43 and 44.