Sunroof

SUNROOF




Removal
- After any repair, check sunroof operation and glass lid alignment.
- Handle the finisher plate and glass lid with care so as not to cause damage.
- To ease installation, mark each point before removal.

CAUTION:
- Always work with a helper.
- Before removal, fully close the glass lid assembly, then after removal, do not move the motor assembly.

SUNROOF LID ASSEMBLY
1. Open the sunroof shade. [A]
2. Close the glass lid. [B]
3. Remove the six bolts securing the glass lid assembly to the sunroof assembly. [C]

SHADE ASSEMBLY
1. After removing the glass lid assembly, remove the two screws securing the drain channel. [D]
2. Remove the drain channel. [E]
3. Remove the shade assembly. [F]

SUNROOF ASSEMBLY
1. Remove the headlining.
2. Disconnect the front and rear drain hoses. [G]
3. Remove the two screws securing the sunroof motor to the sunroof assembly. [H]
4. Remove the sunroof motor and bracket. [J]
5. Remove bolts securing the sunroof assembly to the roof. [K]
6. Remove the sunroof assembly. [L]