Fuel Line Coupler: Service and Repair

Fuel Line Disconnect/Connect Procedure




Disconnect the fuel feed hose quick connector as follows:
a. Apply mating marks on the fuel pump outlet and the quick connector for installation.
b. Hold the quick connector and push in the tabs, then pull out from the fuel pump outlet that is inserted in the quick connector.

CAUTION:
- The quick connector can be removed when the tabs are completely depressed. Do not twist the fuel feed hose more than necessary.
- Do not use any tools to remove the quick connector.

Connect the quick connector in the order as follows:
- Align the mating marks on the fuel pump outlet and quick connector for installation.
- Align the push tabs with the quick connector slots.




- Insert the fuel pump outlet into the center of the quick connector until you hear a click.