Sensor Rotor

SENSOR ROTOR
Removal





1. Remove the drive shaft or rear wheel hub. Refer to Removal, or Removal respectively.





2. Remove the sensor rotor using suitable puller, drift and bearing replacer.

Installation
Install the sensor rotor. For front sensor rotor, use hammer and wooden block. For rear sensor rotor, use suitable drift and press.

CAUTION: Do not reuse sensor rotor. When installing, replace it with a new one.





^ Pay attention to the dimension of rear sensor rotor as shown.
Tool number
A: ST30720000
B: KV40104710

CAUTION: Do not reuse sensor rotor. When installing, replace it with a new one.





^ Press-fit sensor rotor as far as the location shown.