Tightening Torques & Sequences

Rod Bearing Cap





Install connecting rod caps.
^ Apply new engine oil to bolt threads and nut seating surfaces.
^ Tighten connecting rod cap nuts in two steps using Tool.
Step 1 13.72 - 15.68 Nm (1.399 - 1.599 kg-m, 10.120 - 11.566 ft. lbs.)
Step 2 35 - 40 degrees clockwise, or 23 - 28 Nm (2.3 - 2.9 kg-m, 17 - 21 ft. lbs.)