Cylinder Head

4. Tighten cylinder head bolts (1) to (10) in numerical order as shown in 5 steps.
Cylinder head bolts
Step 1: 29.4 Nm (3.0 kg-m, 22 ft. lbs.)
Step 2: 58,8 Nm (6.0 kg-m, 43 ft. lbs.)
Step 3: 0 Nm (0 kg-m, 0 ft. lbs.) (loosen)
Step 4: 27.4 - 31.4 Nm (2.8 - 3.2 kg-m, 21 - 23 ft. lbs.)
Step 5: 50° - 55° (target: 50°) clockwise

CAUTION: Check and confirm the tightening angle by using angle wrench.

5. Tighten cylinder head auxiliary bolts (11) to (14) in numerical order shown.
Cylinder head auxiliary bolts 6.28 - 8.34 Nm (0.64 - 0.85 kg-m, 56 - 73 inch lbs.)
- Verify shank length under bolt head. [Bolt 11: 20 mm (0.79 inch), bolts 12 - 14: 25 mm (0.98 inch)]