Checking Fluid Leakage

Checking Fluid Leakage





Check the lines for improper attachment and for leaks, cracks, dam age, loose connections, chafing and deterioration.

1. Run engine between idle speed and 1,000 rpm.
^ Make sure temperature of fluid in oil tank rises to 60 - 80°C (140 - 176°F).
2. Turn steering wheel right-to-left several times.
3. Hold steering wheel at each lock position for five seconds and carefully check for fluid leakage.

CAUTION: Do not hold the steering wheel in a locked position for more than 10 seconds.

4. If fluid leakage at connectors is noticed, shut off engine, then loosen and retighten flare nut.

CAUTION: Do not overtighten connector as this can damage O-ring, washer and connector.

5. If fluid leakage from power steering pump is noticed, check power steering pump. Refer to PRE DISASSEMBLY INSPECTION.
6. Check dust boots for accumulation of power steering fluid.