Cruise Test-Part 1
Cruise Test-Part 11. CHECK STARTING GEAR (D1) POSITION
1. Drive vehicle for approximately 10 minutes to warm engine oil and ATF up to operating temperature.
ATF operating temperature: 50 - 80°C (122 - 176°F)
2. Park vehicle on flat surface.
3. Set overdrive control switch to ON position.
4. Move A/T selector lever to P position.
5. Start engine.
6. Move A/T selector lever to D position.
7. Accelerate vehicle by constantly depressing accelerator pedal halfway.
8. Does vehicle start from D1?
Read gear position.
Yes or No
Yes >> GO TO 2.
No >> Go to AT-230, 8. Vehicle Cannot Be Started From D1. Vehicle Cannot Be Started From D1
Continue ROAD TEST.
2. CHECK SHIFT UP (D1 TO D2)
Does A/T shift from D1 to D2 at the specified speed?
Read gear position, throttle opening and vehicle speed.
Specified speed when shifting from D1 to D2: Refer to Shift Schedule.
Yes or No
Yes >> GO TO 3.
No >> Go to AT-233, 9. A/T Does Not Shift: D1 -> D2 Or Does Not Kickdown: D4 -> D2. A/T Does Not Shift: D1 -> D2 or Does Not Kickdown: D4 -> D2
Continue ROAD TEST.
3. CHECK SHIFT UP (D2 TO D3)
Does A/T shift from D2 to D3 at the specified speed?
Read gear position, throttle position and vehicle speed.
Specified speed when shifting from D2 to D3: Refer to Shift Schedule.
Yes or No
Yes >> GO TO 4.
No >> Go to AT-235, 10. A/T Does Not Shift: D2 -> D3. A/T Does Not Shift: D2 -> D3
Continue ROAD TEST.
4. CHECK SHIFT UP (D3 TO D4)
Does A/T shift from D3 to D4 at the specified speed?
Read gear position, throttle position and vehicle speed.
Specified speed when shifting from D3 to D4: Refer to Shift Schedule.
Yes or No
Yes >> GO TO 5.
No >> Go to AT-237, 11. A/T Does Not Shift: D3 -> D4. A/T Does Not Shift: D3 -> D4
Continue ROAD TEST.
5. CHECK LOCK-UP (D4 TO D4 L/U)
Does A/T perform lock-up at the specified speed?
Read vehicle speed, throttle position when lock-up duty becomes 94%.
Specified speed when lock-up occurs: Refer to Shift Schedule.
Yes or No
Yes >> GO TO 6.
No >> Go to AT-239, 12. A/T Does Not Perform Lock-up. A/T Does Not Perform Lock-Up
Continue ROAD TEST.
6. CHECK HOLD LOCK-UP
Does A/T hold lock-up condition for more than 30 seconds?
Yes or No
Yes >> GO TO 7.
No >> Go to AT-240, 13. A/T Does Not Hold Lock-up Condition. A/T Does Not Hold Lock-Up Condition
7. CHECK SHIFT DOWN (D4 L/U TO D4)
1. Release accelerator pedal.
2. Is lock-up released when accelerator pedal is released?
Yes or No
Yes >> GO TO 8.
No >> Go to AT-242, 14. Lock-up Is Not Released. Lock-Up Is Not Released
Continue ROAD TEST.
8. CHECK SHIFT DOWN (D4 TO D3)
1. Decelerate vehicle by applying foot brake lightly.
2. Does engine speed return to idle smoothly when A/T is shifted from D4 to D3?
Read gear position and engine speed.
Yes or No
Yes >>
1. Stop vehicle.
2. Go to AT-80, Cruise Test-Part 2.
No >> Go to AT-243, 15. Engine Speed Does Not Return To Idle (Light Braking D4 -> D3). Engine Speed Does Not Return to Idle (Light Braking D2 -> D3)
Continue ROAD TEST.