Seals and Gaskets: Service and Repair

SIDE OIL SEAL
Removal and Installation
1. Remove drain plug and drain the oil from transaxle. Refer to DRAINING.
2. Remove drive shafts.





3. Remove differential oil seal using Tool.





4. Install differential oil seal with a suitable tool (drift).
^ Apply multi-purpose grease to seal lip of oil seal before installing.








5. Install drive shafts.
^ Install differential oil seal so that dimensions A and B are within specifications.
6. Refill the transaxle oil and install the drain plug using a new gasket. Refer to FILLING.