Without Scan Tool

HOW TO ERASE DTC (NO TOOLS)
1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 5 seconds and then turn it ON (engine stopped) again.
2. Perform TCM Self-diagnostic Procedure. Refer to AT-51, TCM Self-diagnostic Procedure (No Tools). Without Scan Tool
(The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
3. Perform OBD-II Self-diagnostic Procedure. Refer to AT-51, TCM Self-diagnostic Procedure (No Tools). Without Scan Tool