In N Position, Vehicle Moves
4. In N Position, Vehicle MovesSYMPTOM: Vehicle moves forward or backward when selecting N position.
1. CHECK CONTROL CABLE
Check control cable. Refer to Control Cable Adjustment.
OK or NG
OK >> GO TO 2.
NG >> Adjust control cable. Refer to Control Cable Adjustment.
2. CHECK A/T FLUID LEVEL
Check A/T fluid level again.
OK or NG
OK >> GO TO 3.
NG >> Refill ATF.
3. CHECK A/T FLUID CONDITION
1. Remove oil pan.
2. Check A/T fluid condition.
OK or NG
OK >> GO TO 4.
NG >>
1. Disassemble A/T.
2. Check the following items:
^ Forward clutch assembly
^ Overrun clutch assembly
^ Reverse clutch assembly
4. CHECK SYMPTOM
Check again.
OK or NG
OK >> INSPECTION END
NG >>
1. Perform TCM input/output signal inspection. Pinout Values and Diagnostic Parameters
2. If NG, recheck TCM pin terminals for damage or loose connection with harness connector.