Data Monitor

DATA MONITOR PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.





1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
3. Turn ignition switch ON.
4. Touch START (NISSAN BASED VHCL) on CONSULT-II screen.





5. Touch ABS. If ABS is not indicated, go to GI-38, CONSULT-II Data Link Connector (DLC) Circuit. CONSULT-II Checking System





6. Touch DATA MONITOR.

Part 1:

Part 2:

DATA MONITOR MODE