How to Select Piston and Bearing
How to Select Piston and BearingDESCRIPTION
^ For the service parts, the grade for fitting cannot be selected between a piston pin and a connecting rod. (Only 0 grade is available.) The information at the shipment from the plant is described as a reference.
^ The identification grade stamped on each part is the grade for the dimension measured in new condition. This grade cannot apply to reused parts.
^ For reused or repaired parts, measure the dimension accurately. Determine the grade by comparing the measurement with the values of each selection table.
^ For details of the measurement method of each part, the reuse standards, and the selection method of the selective fitting parts, refer to the text.