Rod Bearing Cap

Tighten the connecting rod bolts using Tool in four steps as follows:
Apply engine oil to the threads and seats of the connecting rod bolts.

CAUTION: Always use either an angle wrench or protractor. Avoid tightening based on visual check alone.

Step 1 18.6 - 20.6 Nm (1.9 - 2.1 kg-m, 14 - 15 ft. lbs.)
Step 2 85° - 95° (target 90° degrees)
After tightening the bolts, make sure that the crankshaft rotates smoothly.