Ignition Timing: Testing and Inspection

IGNITION TIMING
Any of following two methods may be used.

Method A




1. Slide the harness protector off the ignition coil No.1 to clear the wires.
2. Attach timing light to the ignition coil No. 1 wires as shown in the figure.
3. Check ignition timing.

Method B




1. Remove No. 1 ignition coil.







2. Connect No. 1 ignition coil and No. 1 spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.




3. Check ignition timing.