Tightening Torques & Sequences

^ Install the intake manifold bolts and nuts in the numerical order of the tightening sequence as shown.

CAUTION: After tightening No.5, retighten the No.1 mounting bolt to specification.

^ Tighten in numerical order as shown.

CAUTION: After tightening No.7, retighten the No.1 mounting bolt to specification.

Installation of Electric Throttle Control Actuator:
^ Tighten the mounting bolts of electric throttle control actuator equally and diagonally in several steps.
^ After installation perform procedure in INSPECTION AFTER INSTALLATION.