Antilock Brakes / Traction Control Systems

DTC Index

NOTE:
^ If a trouble code is displayed during the DTC check, check the circuit indicated by the DTC. For details of each code, turn to the page for the respective DTC Code in the DTC chart.
^ Inspect the fuse and relay before investigation the trouble areas as shown in the table below.

1. Drive the vehicle at the speed of 50 km/h (31 MPH) and depress the brake pedal strongly for approximately 3 seconds.
2. Repeat the above operation 3 times or more and check that the ABS warning lamp goes OFF.
3. Clear DTC.

NOTE:
^ In some case, the CONSULT-III cannot be used when the ABS warning lamp remains ON.
^ When U0073, U0123, U0124, U0126, or U0293 is output, inspect and repair the trouble areas indicated by these codes first.

DTC chart of ABS (Part 1):

DTC chart of ABS (Part 2):

DTC chart of VDC:

DTC chart of Electronically Controlled Brake (Part 1):

DTC chart of Electronically Controlled Brake (Part 2):

DTC chart of Electronically Controlled Brake (Part 3):

DTC chart of Electronically Controlled Brake (Part 4):

TEST MODE DTC of ABS:

TEST MODE DTC of VDC:

TEST MODE DTC of Electronically controlled Brake: