Radio, Stereo, and Compact Disc: Adjustments
INSPECTION AND ADJUSTMENTREAR VIEW MONITOR GUIDING LINE ADJUSTMENT
REAR VIEW MONITOR GUIDING LINE ADJUSTMENT: Description
This mode is used to modify the side distance guidelines if they are dislocated from the rear view monitor image, because of variations of body/camera mounting conditions.
REAR VIEW MONITOR GUIDING LINE ADJUSTMENT: Special Repair Requirement
1. Create a correction line to modify the screen. Draw lines on the rearward of the vehicle passing through the following points: 200 mm (7.87 inch) from both sides of the vehicle, and
- *1: 0.5 m (1.5 feet)
- *2: 1 m (3 feet)
- *3: 2 m (7 feet)
- *4: 3 m (10 feet) and from the rear end of the bumper
2. With the ignition switch OFF, connect CONSULT-III, then turn ignition switch ON. Select REARVIEW CAMERA.
CAUTION: Stop engine for safety when correcting side distance guideline.
3. Shift the selector lever to R position.
4. Touch "SELECT GUIDELINE PATTERN" under "WORK SUPPORT" menu.
5. Touch "UP" or "DOWN", and select the guide line, "PATTERN NO.0" or "PATTERN NO.1", which is the closest to the corrected line.
6. Touch "SAVE", and confirm the guide line.
7. Touch "END".
8. Touch "ADJ GUIDELINE POSITION" under the "WORK SUPPORT" menu.
9. Adjust the guide line touching "X UP", "X DOWN", "Y UP" or "Y DOWN" so that the corrected line can fit the guide line.
10. Touch SAVE, and confirm the guide line.
11. Touch END to finish correcting.