Trunk / Liftgate Interior Trim Panel: Service and Repair

TRUNK ROOM TRIM & TRUNK LID FINISHER

Exploded View

TRUNK ROOM TRIM

INT-21 Exploded View (Part 1):

INT-21 Exploded View (Part 2):

Removal and Installation

REMOVAL

TRUNK ROOM TRIM
1. Release the latch, then position rear seatback (RH/LH) to the folded down position.
2. Release the clips, then remove trunk floor carpet.
3. Remove trunk net rear and trunk net side (if installed).
4. Release the clips, then remove trunk rear finisher.
5. Release the clips, then remove trunk side finisher (RH/LH).
6. Remove spare tire cover and trunk floor board (LH).
7. Remove the trunk lid rubber bumper (RH/LH), then release the clips and remove trunk lid finisher.

INSTALLATION
Installation is in the reverse order of removal.