Work Flow

Work Flow

NOTE:
*: Use the CONSULT-III.

1.VEHICLE BROUGHT TO WORKSHOP
Vehicle brought to workshop.
>> GO TO 2.

2.CUSTOMER PROBLEM ANALYSIS
Interview the customer and confirm the trouble.
>> GO TO 3.

3.CHECK DTC AND FREEZE FRAME DATA*
1. Check and record a DTC and Freeze Frame Data.
2. Clear the DTC and Freeze Frame Data.
3. Reconfirm the DTC.
- Reconfirm the DTC based on the recorded DTC and Freeze Frame Data.

NOTE:
If any of the DTCs U0123, U0124, U0126, and U0293 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit.





4.DIAGNOSTIC TROUBLE CODE CHART
Proceed to Diagnostic Trouble Code Chart.
>> GO TO 7.

5.SYMPTOM SIMULATION
Proceed to Diagnostic System.
>> GO TO 6.

6.PROBLEM SYMPTOM TABLE
Proceed to Problem Symptom Table.
>> GO TO 7.

7.CIRCUIT INSPECTION*
Circuit inspection.
>> GO TO 8.

8.IDENTIFICATION OF PROBLEM
Identification of problem.
>> GO TO 9.

9.REPAIR OR REPLACEMENT
Repair or replacement.
>> GO TO 10.

10.CONFIRMATION TEST*
Confirmation test.
>> END