Crankshaft Pulley

Crankshaft Pulley
Tighten crankshaft pulley bolts.
Secure crankshaft pulley with tool to tighten the bolt.
Perform angle tightening with the following procedure:
Apply new engine oil to threads and seat surfaces of bolts.
Tighten to initial specifications:
Crankshaft bolt 42.1 Nm (4.3 kg-m, 31 ft-lb)





Apply a paint mark on the front cover, mating with any one of six easy to recognize stamp marks on bolt flange.
Turn crankshaft pulley bolt another 60° to 66° degrees [Target: 60° degrees].
Check vertical mounting angle with movement of one stamp mark.