Diagnose System

DIAGNOSIS SYSTEM (AUTO AMP.)

CONSULT-III Function






WORK SUPPORT MODE









NOTE: When low voltage battery cable is disconnected or battery voltage is below 10 V, trimmer operation is canceled. Work items becomes that of initial setting.

SELF-DIAG RESULTS MODE

Display Item List
Reading items of DTC. Refer to HAC-147, "DTC Index". Heating and Air Conditioning

DATA MONITOR MODE

Monitor Item






ACTIVE TEST MODE

Test Item

ALL SEG






HVAC TEST






Refer to the following chart and check discharge air flow, air temperature, blower motor duty ratio, compressor operation, heater pump operation and engine operation.

CAUTION: Complete this inspection within 10 seconds if there is no water in the heater pump.






Checks must be made visually, by listening the sound, or by touching air outlets with hand, etc. for improper operation.