Fog/Driving Lamp: Service and Repair

FRONT FOG LAMP

Removal and Installation

REMOVAL
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.

CAUTION:
- Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assembly just before replacement bulb is installed.
- Grasp only the plastic base when handling the bulb. Never touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance.

1. Remove inner splash shield.
2. Position the fender protector aside.




3. Disconnect the fog lamp electrical connector.
4. Remove bolt (A) from top of the fog lamp (1).
5. Remove the fog lamp (1).
- Fog lamp bulb (B)

INSTALLATION
Installation is in the reverse order of removal.
Check fog lamp aiming adjustment. Refer to "Aiming Adjustment".