Auto Light System

AUTO LIGHT SYSTEM

System Diagram






System Description
- BCM (Body Control Module) controls auto light operation according to signals from optical sensor, lighting switch and ignition switch.
- IPDM E/R (Intelligent Power Distribution Module Engine Room) operates parking, license plate, tail, front fog lamps and headlamps according to CAN communication signals from BCM.
- Optical sensor detects ambient brightness of 800 to 2,500 lux. And optical sensor converts light (lux) to voltage, then sends the optical sensor signal to BCM.

OUTLINE
The auto light control system has an optical sensor that detects outside brightness.
When the lighting switch is in AUTO position, it automatically turns ON/OFF the parking, license plate, tail, front fog lamps and headlamps in accordance with the ambient light. Sensitivity can be adjusted in four steps. For the details of the setting, Refer to "HEADLAMP: CONSULT-III Function".

Component Description

AUTO LIGHT OPERATION

Applicable lamps
- Low beam headlamp
- Parking, license plate and tail lamps
- High beam headlamp (with the lighting switch in HIGH BEAM position)
- Front fog lamp (with the lighting switch in front fog lamp ON position)

When the lighting switch is in AUTO position with the ignition switch in ON position, BCM detects the AUTO LIGHT (ON) by BCM combination switch reading function. BCM turns automatically ON/OFF the applicable lamps according to ambient brightness depending on the following condition.
- It turns ON applicable lamps in 3 seconds when ambient brightness is less than 1250 lux.
- The lighted lamps are turned OFF in 5 seconds when ambient brightness becomes 2500 lux or higher.

Releasing Function:
- Turn ignition switch to the OFF position, or
- Change lighting switch to the OFF, 1ST, 2ND position.

NOTE: Timing for when lamps turn ON/OFF can be changed by the function setting of CONSULT-III. Refer to "HEADLAMP: CONSULT-III Function".

COMBINATION SWITCH READING FUNCTION
Refer to "System Description" in Body Control System.

HEADLAMP LOW AND HIGH OPERATION
Refer to "System Description" in Exterior Lighting System.

FRONT FOG LAMP OPERATION
Refer to "System Description" in Exterior Lighting System.

PARKING, LICENSE PLATE AND TAIL LAMPS OPERATION
Refer to "System Description" in Exterior Lighting System.