Diagnosis Tool Function

Diagnosis Tool Function

DESCRIPTION




Generic Scan Tool (OBDII scan tool) complying with SAE J1978 has 8 different functions explained below.
ISO15765-4 is used as the protocol.
The name "GST" or "Generic Scan Tool" is used.

FUNCTION






INSPECTION PROCEDURE
1. Turn ignition switch OFF.




2. Connect "GST" to data link connector (2), which is located under LH dash panel near the hood opener handle (1).




3. Turn ignition switch ON.
4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens, sample screens are shown.)




5. Perform each diagnostic mode according to each service procedure.
For further information, see the GST Operation Manual of the tool maker.