Transmission Control Systems: Testing and Inspection

Inspection





1. Remove the fluid pump cover plug and install suitable tool (A).
2. Measure the fluid pressure.
Fluid pressure: 9.8 kPa (0.1 kg/cm2, 1.4 psi) or more





3. Remove the suitable tool and install the fluid pump cover plug with a new O-ring and tighten to the specified torque.
Pump cover plug: 8.0 Nm (0.82 kg-m, 71 in-lb) Refer to TM-34, "Exploded View". Removal and Installation

CAUTION: Do not reuse O-ring.