Refrigerant Pressure Sensor / Switch: Service and Repair
REFRIGERANT PRESSURE SENSORRemoval and Installation for Refrigerant Pressure Sensor
REMOVAL
1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure".
2. Remove the front grille.
3. Disconnect the refrigerant pressure sensor connector and remove the refrigerant pressure sensor (1) from the liquid tank on the radiator, condenser and liquid tank assembly.
CAUTION: Do not damage the radiator, condenser and liquid tank assembly fins.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: Replace the O-ring of the refrigerant pressure sensor with a new one, then apply electric compressor oil to it when installing it.