LH Only Window Anti-Pinch

POWER WINDOW MAIN SWITCH

ON-VEHICLE REPAIR

POWER WINDOW MAIN SWITCH

Removal and Installation

REMOVAL
1. Remove the power window main switch finisher (2).




2. Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.

CAUTION: Do not fold the pawl of power window main switch finisher.

NOTE: The same procedure is also performed for front power window and door lock/unlock switch RH and rear power window switch (LH & RH).

INSTALLATION
Install in the reverse order of removal.