Additional Service When Replacing Control Unit

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Description
When replacing EPS control unit, this procedure must be performed.

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT: Special Repair Requirement

1. PERFORM EPS MOTOR ANGLE SENSOR INITIALIZATION AND TORQUE SENSOR CALIBRATION
Perform EPS motor angle sensor initialization and torque sensor calibration. Refer to STC-5, "EPS MOTOR ANGLE SENSOR INITIALIZATION AND TORQUE SENSOR CALIBRATION: Special Repair Requirement". EPS Motor Angle Sensor Initialization and Torque Sensor Calibration
>> END