Input Speed Sensor (Turbine Revolution Sensor)

DTC P1715 INPUT SPEED SENSOR (TURBINE REVOLUTION SENSOR)

Description
ECM receives turbine revolution sensor signal from TCM through CAN communication line. ECM uses this signal for engine control.




CONSULT-II Reference Value in Data Monitor Mode




On Board Diagnosis Logic

NOTE:
- If DTC P1715 is displayed with DTC U1000, U1001 first perform the trouble diagnosis for DTC U1000, U1001. Refer to EC-143. U1000
- If DTC P1715 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to EC-145. U1010
- If DTC P1715 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335. Refer to EC-295. P0335
- If DTC P1715 is displayed with DTC P0340 first perform the trouble diagnosis for DTC P0340. Refer to EC-302. P0340
- If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to EC-397. P0605

The MIL will not lights up for this diagnosis.

Diagnostic Procedure

Step 1-2: