Front Seat

FRONT SEAT

Disassembly and Assembly

SEAT CUSHION TRIM AND PAD

CAUTION:
- Front passenger seat is equipped with an Occupant Classification System sensor and control module. Do not disassemble front passenger seat cushion assembly or remove the trim as this will affect the Occupant Classification System calibration.
- During installation, the wire harness clips must be installed in the holes they were originally in. Do not add additional clips.

Disassembly
1. Remove the retainer of seat cushion trim.
2. Remove the hog rings to separate the seat cushion pad and seat cushion trim.
3. Remove seat cushion trim and seat cushion pad from the seat cushion frame.

Assembly
Assembly is the reverse order of removal.

SEAT CUSHION FRAME

Disassembly
1. Remove the seat cushion trim and pad. Refer to "SEAT CUSHION TRIM AND PAD".




2. Remove the seat cushion finisher B. (Driver seat)
3. Remove the seat cushion lower finisher.




4. Remove the front seat belt buckle.

Assembly
Assembly is the reverse order of removal.