System Inspection

Inspection

LEVEL CHECK





^ Check if the reservoir tank engine coolant level is within the "MIN" to "MAX" range when engine is cool.
^ Adjust the engine coolant level as necessary.

CHECKING COOLING SYSTEM FOR LEAKS





To check for leaks, apply pressure to the cooling system using Tool.
Tool number: EG17650301 (J-33984-A)
Testing pressure: 157 kPa (l.6 kg/cm2, 23 psi)

WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator.

CAUTION:
Higher pressure than specified may cause radiator damage.