Mode Door
MODE DOORMode Door Cable Adjustment
1. Remove glove box assembly and instrument lower cover (RH).
2. Remove outer cable of mode door cable (1) from clamp (A).
3. Set mode control dial to VENT position.
4. Push main link (2) in the direction shown by the arrow, and then carefully pull outer cable to controller side, and install clamp (A).
5. Operate mode control dial to insure that inner cable moves smoothly.
CAUTION: When clamping the outer cable, do not move the inner cable.
6. Turn mode control dial to each position.
7. Confirm that discharge air comes out according to the air distribution table. Refer to "Discharge Air Flow".