Removal and Replacement

CONTROLLER

Removal and Installation

REMOVAL
1. Remove cluster lid C and instrument finisher D.




2. Remove intake door lever knob.
3. Remove mounting screws and clips, and then remove controller finisher.




4. Remove mounting screws, and then pull out controller.
5. Remove instrument panel and pad.
6. Remove air mix door cable, mode door cable and intake door cable from A/C unit assembly.
7. Disconnect connector, and then remove controller.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: Adjust the door cables during installation. Refer to "Intake Door Cable Adjustment", "Mode Door Cable Adjustment" and "Air Mix Door Cable Adjustment".