Center Mounted Brake Lamp: Service and Repair

Removal and Installation of High-Mounted Stop Lamp

HATCHBACK

Removal
1. Remove the rear hatch finish panel.
2. Disconnect the high-mounted stop lamp connector.




3. Remove the nuts and remove the high-mounted stop lamp from rear hatch.

Installation
Installation is in the reverse order of removal.

CAUTION: Properly seal the high-mounted stop lamp base to the rear hatch to prevent water leaks.

SEDAN

Removal
1. Remove the rear parcel shelf.




2. Remove the high-mounted stop lamp screws (A) and remove the high-mounted stop lamp (1).




3. Remove the high-mounted stop lamp finisher screws (A) and remove the high-mounted stop lamp finisher (1).

Installation
Installation is in the reverse order of removal.