Refrigerant Pressure Sensor / Switch: Service and Repair

Removal and Installation of Refrigerant Pressure Sensor

REMOVAL
1. Use the recovery/recycling equipment to evacuate the refrigerant.




2. Disconnect connector, and then remove refrigerant pressure sensor (1) from condenser (2).

CAUTION: When working, be careful not to damage the condenser fins.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- Replace O-rings of refrigerant pressure sensor with a new one, and apply compressor oil when installing.
- When recharging refrigerant, check for leaks.