Revolution Sensor

Revolution Sensor

AT-221 Components:

REMOVAL AND INSTALLATION

Removal
1. Disconnect the battery negative terminal.
2. Remove air duct (inlet), air duct and air cleaner case.





3. Disconnect revolution sensor harness connector.
4. Remove clip (A).
5. Remove revolution sensor (1) from A/T.
<---: Bolt (2)
6. Remove O-ring from revolution sensor (1)

Installation
Installation is in the reverse order of removal.

CAUTION:
^ Do not reuse O-ring.
^ Apply ATF to O-ring.

^ Ensure revolution sensor harness is firmly secured with bolt.
(1): Revolution sensor
<---: Bolt (1)