Turbine Revolution Sensor (Power Train Revolution Sensor)

Turbine Revolution Sensor (Power Train Revolution Sensor)

AT-222 Components:

REMOVAL AND INSTALLATION

Removal
1. Disconnect the battery negative terminal.
2. Remove air duct (inlet).





3. Disconnect turbine revolution sensor (power train revolution sensor) harness connector (1).
4. Remove turbine revolution sensor (power train revolution sensor) bolt.
<---: Bolt (1)
5. Remove turbine revolution sensor (power train revolution sensor) (2) from A/T.
6. Remove O-ring from turbine revolution sensor (power train revolution sensor) (2).

Installation
Installation is in the reverse order of removal.

CAUTION:
^ Do not reuse O-ring.
^ Apply ATF to O-ring.