Engine Cannot Be Started In "P" and "N" Position
Engine Cannot Be Started in "P" and "N" PositionSYMPTOM:
^ Engine cannot be started with selector lever in "P" or "N" position.
^ Engine can be started with selector lever in "D", "L" or "R" position.
DIAGNOSTIC PROCEDURE
1. CHECK SELF-DIAGNOSTIC RESULTS
Perform self-diagnosis check. Refer to CVT-47, "CONSULT-III Function (TRANSMISSION)". Consult-III Function (Transmission)
Do the self-diagnostic results indicate PNP switch circuit or start signal circuit?
YES >> Check PNP switch circuit or start signal circuit. Refer to CVT-65 or CVT-60.
P0705
P0615
NO >> GO TO 2.
2. CHECK CVT POSITION
Check CVT position. Refer to CVT-171, "Checking of CVT Position". Testing and Inspection
OK or NG
OK >> GO TO 3.
NG >> Adjust CVT position. Refer to CVT-171, "Adjustment of CVT Position". Adjustments
3. CHECK STARTING SYSTEM
Check starting system. Refer to SC-8.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.