Diagnosis Procedure

KEY SLOT INDICATOR


Description

Blinks when Intelligent Key insertion is required.




KEY SLOT INDICATOR


Diagnosis Procedure

1.CHECK KEY SLOT INDICATOR OUTPUT SIGNAL
Check voltage between key slot harness connector and ground.





Is the inspection result normal?
YES - GO TO 5.
NO - GO TO 2.
2.CHECK KEY SLOT POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect key slot connector.
3. Check voltage between key slot harness connector and ground.





Is the inspection result normal?
YES - GO TO 3.
NO-1 - Check 10 A fuse [No. 6 and 9 located in the fuse block (J/B)].
NO-2 - Check harness for open or short between key slot and fuse.
3.CHECK KEY SLOT GROUND CIRCUIT
Check continuity between key slot harness connector and ground.





Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace key slot ground circuit.
4.CHECK KEY SLOT CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect BCM connector.
3. Check continuity between BCM harness connector and key slot harness connector.





4. Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES - Replace key slot. Refer to Removal And Installation.
NO - Repair or replace harness.
5.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END