Operation CHARM: Car repair manuals for everyone.

Symptom Related Diagnostic Procedures





MULTI AV SYSTEM SYMPTOMS


Symptom Table


RELATED TO NAVIGATION

Symptom Table:






RELATED TO HANDS-FREE PHONE
- Check that the cellular phone is a corresponding type (Bluetooth(TM) correspondence) when the hands-free related malfunction vehicle is in service before performing a diagnosis.
- There is a case that malfunction occurs due to the version change of the phone type, etc. even though it is a corresponding type. Therefore, confirm it by changing the cellular phone to another corresponding type phone, and check that it operates normally. It is necessary to distinguish whether the cause is the vehicle or cellular phone.

Simple Check for Bluetooth(TM) Communication
If cellular phone and AV control unit cannot be connected with Bluetooth(TM) communication, the following procedure allows the technician to judge which device has a malfunction.
1. Turn on the cellular phone, not connecting Bluetooth(TM) communication.
2. Start CONSULT-III, then start Windows(R).
3. Set CONSULT-III near the cellular phone.





4. When operating Bluetooth(TM) registration by cellular phone, check if CONSULT-III* is displayed on the device name.
(If another Bluetooth(TM) device is located near the cellular phone, the name of the device will also be displayed.)

NOTE:
*:Displayed device name is "NISSAN- *******".
- If no device name is displayed, cellular phone is malfunctioning.
Repair the cellular phone first, then perform diagnosis.
- If CONSULT-III is displayed on device name, cellular phone is normal. Perform diagnosis as per the following table.






RELATED TO RGB IMAGE






RELATED TO VOICE CONTROL











RELATED TO AUDIO






RELATED TO IPod(R)
Connect another iPod(R) and check if the symptom is reproduced or not. If the symptom is reproduced, diagnose the vehicle. If no malfunction is detected, replace the iPod harness.

NOTE:
It is unable to read a connection between iPod(R) and iPod harness.











RELATED TO STEERING SWITCH






RELATED TO AUXILIARY INPUT

NOTE:
Check that there is no malfunction of AUX equipment main body before performing a diagnosis.