Disassembly and Assembly

REAR BUMPER WITH AERODYNAMIC DIFFUSER


Disassembly and Assembly







REMOVAL
1. Remove the emblem (NISSAN) and the emblem (370Z) and the emblem (NISMO).
2. Remove the tapping screws and then remove the rear license lamp assembly.
3. Remove the rivets from the left and right of the rear bumper fascia and then remove the rear bumper brace (RH) and the rear bumper brace (LH).
4. Remove the rivets from the left and right of the rear bumper fascia and then remove the rear bumper protector (RH) and the rear bumper protector (LH).
5. Remove the rear bumper side spacer and the spacer from the back side of rear bumper fascia.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Remove the oil and grease from the attachment surface and clean it.
1. Attach the rear bumper side spacer and the spacer to the underside of the rear bumper fascia.





2. Press the rear bumper protector (RH) and the rear bumper protector (LH) against the rear bumper fascia at the left and right while fastening them with rivets. Be careful not to leave any space in between.
3. Attach the rear bumper brace (RH) and the rear bumper brace (LH) to the rear bumper fascia at the left and right.
4. Install the rear license lamp assembly.
5. Install the emblem (NISSAN) and the emblem (370Z) and the emblem (NISMO).