Removal And Installation

FUEL FILLER LID OPENER


Removal and Installation


NOTE:
When fuel filler lid lock actuator (1) is a defective operation, pull the rod to open fuel filler lid.






REMOVAL
1. Remove luggage side finisher upper (RH). Refer to Removal And Installation.
2. Pull and remove lock and rod assembly forward, while pushing the pawls.
3. Rotate lock nut counterclockwise, and then remove lock nut.
4. Push fuel filler lid opener actuator behind the vehicle, while pushing the pawl.
5. Disconnect harness connector and remove fuel filler lid opener actuator.
6. Remove mounting screws, and then remove fuel filler lid.

INSTALLATION
Install in the reverse order of removal.